Product Specification
CLINO10M™
Air Classified Clinoptilolite Zeolite
CLINO10M™ Is a universal, odor-reducing filler for the plastics, rubber, coating, and paint industries.
Product code: 1010
Composition: Hydrated aluminosilicate mineral
Physical appearance: White to cream color free-flowing dry powder
SPECIFICATION | |
Fineness (Amount Retained when wet sieved on 20 μm, #325 sieve) (%) | < 1 |
Median particle size (µm) | 5 |
Specific Surface Area | 20–40 m²/g |
Specific Gravity | 1.89 |
Cation Exchange Capacity | 150 mEq per \100g |
Pore Diameter | 4-7 angstrom |
Hardness | 4-5 Mohs |
Moisture content (%) | < 3 |
Loss on Ignition LOI (%) | < 10 |
| Melting point | 1000˚C Min |
Swelling index | 0 |
Bulk weight | 50 - 60lbs / ft3 |
MATERIAL DESIGNATIONS
California Prop 65, Safe Drinking Water and Toxic Enforcement Act of 1986 : There are no chemicals present known to the state of California to cause cancer or reproductive toxicity.
The information presented herein, while not guaranteed, was prepared by technical personnel and, to the best of our knowledge and belief, is true and accurate. No warranty, representation or guarantee, express or implied, is made regarding accuracy, performance, stability, reliability or use. This information is not intended to be all –inclusive, because the manner and conditions of use, handling, storage and other factors may involve other or additional safety or performance considerations. The user is responsible for determining the suitability of any material for a specific purpose and for adopting such safety precautions as may be required. Clinosource does not warrant the results to be obtained in using any material, and disclaims all liability with respect to the use, handling or further processing of any such material. No suggestion for use is intended as, and nothing herein shall be construed as, a recommendation to infringe any existing patent or to violate any federal, state or local law or regulation.